ESP8285 M2 WiFi Module

ESP-M2 is encapsulated by the high performance chip ESP8285, which is equal to ESP8266 chip plus 1M Flash. The chip ESP825 is encapsulated a advanced Tensilica’s L106 32-bit CPU, together with SRAM. ESP825 has the full and complete WiFi fuction, which can used independently and alsoused as a slaver with other Hoster MCU, which can start directly from the out-built Flash. In addition, the built-in high-speed buffer is benefit for the system performance. Especially, ESP8285 can be used as a WiFi adapter by SPI/SDIO and/or I2C/UART interface, when it is applied to the other MCU design.

Features

  • Ultra-small size
  • Support serial to WiFi
  • Wireless transparent transmission
  • Long distance transmission with ultra-low power
  • Support outboard antenna
  • Bearing high temperature to 125oC, compared to the 85oC for ESP8266.
Description
Mannequin Identify/Quantity ESP 8285
Model DOIT
Working Temperature Vary -40 -85 Deg C
Module Dimension 12.3mmx20mm
Energy Provide Voltage DC 3.3V
IO max Output Present 12 mA

Description:

ESP8285=ESP8266+1M Flash, chip feature1) measurement is ultra-small2) serial to WiFi3) wi-fi transmission4) long-range ultra-low energy consumption5) excessive temperature, as much as 125oC) totally suitable with ESP8266, the esp8266 supply code can be utilized for esp8285

SOC Options:

  • Constructed-in Tensilica L106 ultra-low energy 32-bit microprocessor, clocked at 80MHz and 160MHz help RTOS
  • Constructed-in TCP / IP protocol stack
  • Constructed-in 1 channel 10 bit precision ADC
  • Peripheral Interface HSPI, UART, I2C, I2S, IR Distant Management, PWM, GPIO
  • The deep sleep maintain present is 10uA and the shutdown present is lower than 5uA
  • Get up inside 2 ms, join and cross the packet
  • Standby energy consumption lower than 1.0mW (DTIM3)

Wi-Fi options: 

  • Helps 802.11 b / g / n / e / i
  • Help Station, SoftAP, SoftAP + STA mode
  • Help for Wi-Fi Direct (P2P)
  • Helps CCMP (CBC-MAC, counter mode), TKIP (MIC, RC4), WAPI (SMS4), WEP
  • (RC4), CRC {hardware} acceleration
  • P2P discovery, P2P GO mode / GC mode and P2P energy administration
  • WPA / PA2 PSK and WPS
  • 802.11 i safety features: pre-authentication and TSN
  • Helps 802.11n (2.4 GHz)
  • 802.1h / RFC1042 body encapsulation
  • Seamless roaming help
  • Help AT distant improve and cloud OTA improve
  • Help for Good Config options (together with Android and iOS gadgets)

Module peripherals

  • 2xUART
  • 1xADC
  • 1xEn
  • 1x wakeup pin
  • 1xHSPI
  • 1xI2C
  • 1xI2S
  • As much as 11xGPIOs
  • 4M bytes of SPI Flash
  • Working temperature vary: -40 ??? -85 ???
  • Module measurement: 12.3mm×20mm

Word:

  • Energy provide oltage is DC 3.3V
  • IO max output present is 12mA
  • NRST pin lively low, EN allow pin lively excessive RXD to MCU’s TXD, TXD to MCU’S
  • RXD

Software:

  • Family home equipment
  • Good socket, clever mild
  • Child monitor
  • Sensor Networks
  • Safety ID tag
  • Wi-fi positioning system beacon
  • Dwelling automation
  • Mesh community
  • IP digital camera
  • Can put on digital merchandise
  • Wi-fi location consciousness
  • Industrial Wi-fi Management

ESP-M2 is encapsulated by the excessive efficiency chip ESP8285, which is enough to ESP8266 chip plus 1M Flash. The chip ESP825 is encapsulated a superior Tensilica’s L106 32-bit CPU, alongside aspect SRAM. ESP825 has the whole and full WiFifuction, which can used independently and alsoused as a slaver with different Hoster MCU, which can begin straight from the out-built Flash. As well as, the built-in high-speed buffer is profit for the system efficiency. Particularly, ESP8285 are sometimes used as a WiFi adapter by SPI/SDIO and/or I2C/UART interface, when it is utilized to the other MCU design.

Options:

Extremely-small measurement, Help serial to WiFi, Wi-fi clear transmission, Lengthy-distance transmission with ultra-low energy, Help outboard antenna. Bearing excessive temperature to 125oC, in comparison with the 85oC for ESP8266.

ESP8285=ESP8266+1M Flash, chip feature1) measurement is ultra-small2) serial to WiFi3) wi-fi transmission4) long-range ultra-low-power consumption5) excessive temperature, as much as 125oC) totally suitable with ESP8266, the esp8266 supply code can be utilized for esp8285

SOC Options:

Constructed-in Tensilica L106 ultra-low energy 32-bit microprocessor, clocked at 80MHz and 160MHz help RTOS
Constructed-in TCP / IP protocol stack, Constructed-in 1 channel 10 bit precision ADC. Peripheral Interface HSPI, UART, I2C, I2S, IR distant , PWM, GPIO. The deep sleep maintain present is 10uA and subsequently the shutdown present is a smaller quantity than 5uA, awaken inside 2 ms, join and cross the packet, Standby energy consumption lower than 1.0mW (DTIM3)

Wi-Fi Options:

Helps 802.11 b / g / n / e / i, Help Station, SoftAP, SoftAP + STA mode, Help for Wi-Fi Direct (P2P), Helps CCMP (CBC-MAC, counter mode), TKIP (MIC, RC4), WAPI (SMS4), WEP, (RC4), CRC {hardware} acceleration, P2P discovery, P2P GO mode / GC mode and P2P energy administration. WPA / PA2 PSK and WPS, 802.11 i safety features: pre-authentication and TSN, Helps 802.11n (2.4 GHz), 802.1h / RFC1042 body encapsulation. Seamless roaming help, Help AT distant improve and cloud OTA improve, Help for Good Config options (together with Android and iOS gadgets)