SEN-PPI150:PP Water Float Sensor

Plastic PP material, switching signal,apply to water dispenser,humidifier,water air conditioning, air conditioning fan etc.

Technical Parameter: 

  • Used medium: Water or liquid that has no damage to the float,0- 60 Deg C
  • Voltage/electric current: DC2000V,≤0.5A
  • Custom-made: Wire harness specification, dimension of float, warning point, switching power
Description

SEN-PPI150 PP Water Float Sensor Module

A float swap could also be a type of stage sensor, a device wont to detect the extent of liquid inside a tank. The swap could also be used to manage a pump, as an indicator, an alarm, or to manage different units.

One type of float swap makes use of a mercury swap inside a hinged float. One other widespread kind is a float that raises a rod to actuate a microswitch. One sample makes use of a reed swap mounted throughout a tube; a float, containing a magnet, surrounds the tube and is guided by it. When the float raises the magnet to the reed swap, it closes. A number of reeds are sometimes mounted inside the tube for varied stage indications by one meeting. Some float switches comprise a two-stage swap. As liquid rises to the set off level of the first stage, the related pump is activated. If the liquid continues to rise (maybe as a result of the pump has failed or its discharge is blocked), the second stage are going to be triggered. This stage could minimize the supply of the liquid being pumped, set off an alarm, or each.

SEN-PPI150 PP Vertical Magnetic Water Float Degree Change Used medium: Water or liquid that has no harm to the float,0- 60 Deg C, Voltage/electrical present: DC2000V,≤0.5A and Customized-made: Wire harness specification, dimension of float, warning level, switching energy

The place stage should be sensed inside a pressurized vessel, usually a magnet is used to couple the movement of the float to a swap situated outdoors the pressurized quantity. In some circumstances, a rod by way of a packing field are sometimes wont to function a swap, however this creates excessive drag and includes a potential for leakage. Profitable float swap installations decrease the possibility for accumulation of grime on the float that may impede its movement. Float swap supplies are chosen to withstand the deleterious results of corrosive course of liquids. In some techniques, a correctly chosen and sized float are sometimes wont to sense the interface stage between two liquids of varied density.

Product Particulars:

Repair Screw M 10
Switching Response Time 0.2 ms
Switching Energy 10 W, usually open, (NO), double alarm level
Switching Life 108 occasions
Rated Voltage Much less Than DC24V(for top voltage use, entry intermediate relay)
Insulation Resistor 108 Ohm
Set up Methodology Vertical entry 150 mm
Floating Diameter 24 mm