Texas XTR105UA Built-in Circuits
| Brand | Texas Instruments |
| Mounting Type | SMD/SMT |
| Weight | 129.400 mg |
| Model Number | XTR105UA |
| Supply Voltage | 36 V Max. |
| Supply Voltage Min | 7.5 V |
| Minimum Operating Temperature | – 40 C |
| Maximum Operating Temperature | + 85 C |
| Height | 1.58 mm |
| Length | 8.65 mm |
| Series | XTR105 |
| Width | 3.91 mm |
| Ib Input Bias Current | 0.05 ua |
| Moisture Sensitive | Yes |
Description
The XTR105 is a monolithic 4-20mA, 2-wire current transmitter with two precision current sources. It provides full current excitation for platinum RTD temperature sensors and bridges, instrumentation amplifiers, and current output circuitry on a single built-in circuit.
Versatile linearization circuitry provides a 2nd-order correction to the RTD, normally reaching a 40:1 enchancment in linearity.
Instrumentation amplifier purchase could possibly be configured for quite a lot of temperature or stress measurements. Full unadjusted error of your complete current transmitter is low adequate to permit use with out adjustment in a number of capabilities. This accommodates zero output current drift, span drift, and nonlinearity. The XTR105 operates on loop power-supply voltages proper all the way down to 7.5V.
The XTR105 is accessible in DIP-14 and SO-14 surfacemount packages and is specified for the –40°C to +85°C industrial temperature range.
Choices:
- Low Unadjusted Error
- Two Precision Current Sources 800µA each
- Linearization
- 2- Or 3 wire RTD Operation
- Low Offset Drift 0.4µV/°C
- Low Output Current Noise: 30nAPP
- Extreme PSR: 110dB minimal
- Extreme CMR: 86dB minimal
- DIP-14 AND SO-14 Packages
Features:
- Industrial course of administration
- Manufacturing unit Automation
- Scada Distant information Acquisition
- Distant Temperature and stress transducers
