LPC1768FBD100 NXP Built-in Circuits

Product Brochure

Brand NXP
Part Number LPC1768FBD 100
Series LPC176X
Core ARM Cortex M3
Program Memory Size 512 kb
Data Bus Width 32 Bit
ADC Resolution 12 Bit
Maximum Clock Frequency 100 MHz
Number of I/Os 70 I/O
Data Ram Size 64 Kb
Operating Supply Voltage 2.4 V to 3.6
Operating Temperature -40 degree C to 85 degree C
Packaging Type Cup Reel Tray
Description

The LPC1768 is ARM Cortex-M3 based totally microcontrollers for embedded functions that features a extreme stage of integration and low vitality consumption. The Arm Cortex-M3 is a subsequent period core that gives system enhancements akin to enhanced debug choices and the following stage of help block integration.

The LPC1768 operate at CPU frequencies of as a lot as 100 MHz. The LPC1769 operates at CPU frequencies of as a lot as 120 MHz. The Arm Cortex-M3 CPU incorporates a 3-stage pipeline and makes use of a Harvard construction with separate native instruction and knowledge buses along with a third bus for peripherals. The Arm Cortex-M3 CPU moreover incorporates an interior prefetch unit that helps speculative branching.

Choices:

  • ArmĀ®Ā Cortex-M3 processor, working at frequencies of as a lot as 100 MHz
  • Arm Cortex-M3 built-in Nested Vectored Interrupt Controller (NVIC)
  • As a lot as 512 kB on-chip flash programming memory
  • As a lot as 64 kB On-chip SRAM
  • In-System Programming (ISP) and In-Software program Programming (IAP)
  • Eight channel Regular Objective DMA controller (GPDMA)
  • Ethernet MAC with RMII interface and devoted DMA controller
  • USB 2.0 full-speed machine/Host/OTG controller
  • 4 UARTs with fractional baud cost period, interior FIFO, and DMA help
  • CAN 2.0B controller with two channels
  • SPI controller with synchronous, serial, full duplex communication
  • Two SSP controllers with FIFO and multi-protocol capabilities
  • Three enhanced I2C bus interfaces
  • I2S (Inter-IC Sound) interface
  • 70 Regular Objective I/O (GPIO) pins with configurable pull-up/down resistors
  • 12-bit/8-ch Analog/Digital Converter (ADC) with conversion expenses as a lot as 200 kHz
  • 10-bit Digital/Analog Converter (DAC) with devoted conversion timer and DMA
  • 4 frequent operate timers/counters
  • One motor administration PWM with help for three-phase motor administration
  • Quadrature encoder interface which will monitor one exterior quadrature encoder
  • One commonplace PWM/timer block with exterior rely enter
  • Low vitality RTC with a separate vitality space and devoted oscillator
  • WatchDog Timer (WDT)
  • Arm Cortex-M3 system tick timer, along with an exterior clock enter risk
  • Repetitive interrupt timer provides programmable and repeating timed interrupts
  • Each peripheral has its private clock divider for extra vitality monetary financial savings
  • Commonplace JTAG check out/debug interface for compatibility with present devices
  • Constructed-in PMU (Power Administration Unit)
  • 4 decreased vitality modes: Sleep, Deep-sleep, Power-down, and Deep power-down
  • Single 3.3 V vitality present (2.4 V to a few.6 V)
  • 4 exterior interrupt inputs configurable as edge/stage delicate
  • Non-maskable Interrupt (NMI) enter
  • Wake-up Interrupt Controller (WIC)
  • Processor wake-up from Power-down mode by means of any interrupt
  • Brownout detect with separate threshold for interrupt and compelled reset
  • Power-On Reset (POR)
  • Crystal oscillator with an working range of 1 MHz to 25 MHz
  • 4 MHz interior RC oscillator trimmed to 1 % accuracy
  • Code Study Security (CRP) with completely completely different security ranges
  • Distinctive machine serial amount for identification capabilities

Objective Capabilities:

  • eMetering
  • Lighting
  • Industrial networking
  • Alarm methods
  • White gadgets
  • Motor administration