HLK 40M09 Energy Module

HLK-40M09, 40W power 09V output Hi-Link AC-DC power module

Features : HLK-40M09 power module

Ultra-thin, ultra-small, smallest volume in the industry
Global universal input voltage (90~265Vac)
Low power consumption, environmental protection, no-load loss <0.1W
Low ripple and low noise

Applications: HLK-40M09 power module

Can be used in medical, industrial control, electric power, instrumentation, communication, railway and other fields

12 People watching this product now!

A power supply is an electrical device that supplies electric power to an electrical load. The primary function of a power supply is to convert electric current from a source to the correct voltage, current, and frequency to power the load. As a result, power supplies are sometimes referred to as electric power converters.

The Hi-Link Power Supply Module is a plastic enclosed PCB mounted isolated power supply module. It is widely used in a smart home, automation and control, communication equipment, instrumentation, and other industries.

AC-DC step-down isolation power supply module 40M09A 220V to 09V40W regulated power supply + EMC circuit

HLK-40M09 Hi-Link 09V 40W AC to DC Power Supply Module is a plastic enclosed PCB mounted isolated power supply module. It can supply 09V DC from 90V AC to 265V AC and has a power rating of 40 Watt. This makes it perfect for small projects that need a 09 volt supply from mains. There are many advantages to these modules, such as low-temperature rise, low power, high efficiency, high reliability, high-security isolation, etc.

The 40W ultra-small series module power supply is a small-size, high-efficiency, power module designed by Hi-link Electronics for customers with advanced Gallium Nitride chipset. It has the advantages of global input voltage range, low temperature rise, low power consumption, high efficiency, high reliability, and high safety isolation. It has been widely used in smart home, automation control, communication equipment, instrumentation and other industries

You do not have to worry about fluctuations in the voltage grid. It is designed to be mounted on the PCB and is the ideal solution to power pads that you take.

PRODUCT FEATURES : Hi-Link HLK40M09

Global universal input voltage 90~265VAC
Input and output isolation withstand voltage 3000VAC
Low power consumption, environmental protection, no-load loss < 0.1W
Can work without peripheral circuits
High reliability, long life design, continuous working time> 100,000 hours
Good output short circuit and over current protection and self-recovery
International standard pin, PCB board in-line installation
Potting and sealing with high-quality environmentally friendly waterproof thermal conductive glue, dustproof, moistureproof, shockproof and flame retardant
Meet UL/CE/EMC and safety testing requirements
Can be used in medical, industrial control, electric power, instrumentation, communication, railway and other fields

Environmental conditions
Operating temperature	-25~+60℃
storage temperature	-40~+85℃
Relative humidity	5~95%RH
Cooling method	Natural cooling
Atmospheric pressure	80~160Kpa
Altitude	≤2000m
vibration	Vibration coefficient 10~500Hz, 2G10min./1cycle60min.each along X,Y,Z axes
vibration	Meet the requirements of secondary road transportation
Input characteristics (normal temperature test)
Rated input voltage	100-277VAC
Input voltage range	85-264VAC/70-350VDC
Maximum input current	≤1A(@Vin=110Vac)
Input surge current	≤30A(typical)
Input slow start	≤100mS
Long-term reliability	MTBF≥100，000H
External fuse recommendation	3.15A/300V(Slow blow)
Output characteristics
Output load	Load percentage 100%MAX
Voltage regulation rate	±0.2 %（Tpy）
Load Regulation	±0.5 %（Tpy）
Output overcurrent protection	130%-150%（Maximum load）
Output short circuit protection	Sustainable, self-healing (do not damage the host)
Ripple & noise	≤100mVp-p