OLED 7Pin 128×64 Show Module 0.96″ White Coloration

OLED’s are the future of displays, as they possess some of the greatest advantages over both conventional display technologies of LCD’s and LED‘s.

Features: 0.96 Inch ,7 Pin,White OLED Display Module

  • No need of the backlight
  • The display is self-illuminating
  • Power requirement is low
  • Pixel Color: Yellow (Top 128×16 Pixels) & Blue (Bottom 128×48 Pixels)
  • They are offering the large viewing angle
  • Full Compatible with Arduino
  • Factory configured for SPI protocol (can easily change to IIC)
  • Better performance characteristics than traditional LCD and LED displays.
  • Only Need 2 I/O Port Control

Applications: 0.96 Inch ,7 Pin,White OLED Display Module

  • Used in consumer electronics.
  • Used for Smartwatch, mobile phone, and MP3 displays
  • Small level gaming displays.
  • Wide range of viewing angle enable to be used in low light
Description

OLED’s are the way forward for shows, as they possess a few of the best benefits over each standard show applied sciences of LCD’s and LED‘s.

Probably the most enticing factor about utilizing the OLED shows is that they don’t want a back-light like standard LCD/LED screens. The natural materials itself has a property generally known as Electroluminescence (EL), which causes the fabric to “glow” when stimulated by a present or an electrical subject. Finest vitality saving shows ever!!!

This 0.96″ OLED Show Module presents 128×64 pixel decision. They’re that includes a lot much less thickness than LCD shows with good brightness and in addition produce higher and true colours

This OLED Show Module could be very compact and can add a terrific ever consumer interface expertise to your Arduino venture. The connection of this show with Arduino is made via the I2C(additionally known as as IIC) serial or SPI interface.

The 0.96″ OLED Show Module produces blue textual content on black background with superb distinction when equipped with DC 2.8V provide. The OLED Show Modules additionally presents a really broad viewing angle of about better than 160°.

This OLED Show Module could be very compact and can add a terrific ever consumer interface expertise to your Arduino venture. The connection of this show with Arduino is made via the I2C(additionally known as as IIC) serial or SPI interface.

OLED’s are the long run of shows, as they possess various one of the best benefits over each standard show applied sciences of LCD’s and LED‘s.
Probably the most enticing factor about utilizing the OLED shows is that they’re doing not want a back-light like standard LCD/LED screens. The natural materials itself has a property generally known as Electroluminescence (EL), which causes the fabric to “glow” when stimulated by a present or an electrical subject. Finest vitality saving shows ever!!!

7Pin 0.96 Inch iic or spi serial 128×64 white oLED show module interface: gnd: floor vcc: energy (2.8V5.5V) d0: clock d1: information res: reset DC: information or command cs: chip choice characteristic: needn’t backlight, the show unit can self luminous excessive decision: 128 x 64 viewing angle: > 160 diploma helps many management chip: absolutely suitable with Arduino, 51 collection, msp430 collection, stm32 or 2, csric, and many others. Ultralow energy consumption: full display screen lit 0.08W voltage: 3v – 5v DC working temperature: 40℃ – 70 ℃ module measurement: 27.3 x 27.8 x 3.7mm iic or spi interface, want 4 io solely. Driver ic: ssd1306 what’s oLED? OLED (natural mild emitting diode) is a self mild emitting expertise composed of a skinny, multilayered natural movie positioned between an anode and cathode. In distinction to LCD expertise, oLED doesn’t require a backlight. OLED possesses excessive utility potential for nearly all kinds of shows and is considered the last word expertise for the following era of flat panel shows. The usage of oLED expertise has the next benefits: 1. A simplified manufacturing course of in comparison with tftLCD (see comparability of image 1 and movie 2 beneath) 2. Self emitting mild, in distinction to the required backlight for tftLCD 3. Excessive luminosity 4. Light-weight and skinny (lower than 2 mm) 5. Low working voltage and energy consumption 6. Wide selection of working temperatures (40℃ to 85℃)