Options: 0.96 Inch Yellow Blue Color 6 Pin
- OLED Driver IC: SSD1306
- Decision: 128 x 64
- Visible Angle: >160°
- Enter Voltage: 3.3V ~ 6V
- Appropriate I/O Stage: 3.3V, 5V
- Mini Measurement: 2.7 x 2.8cm
- Solely Want 2 I/O Port to Management
- Pixel Colour: Yellow (Prime 128×16 Pixels) & Blue (128×48 pixels)
- Full Appropriate with Arduino
- Working temperature: -30°C ~ 70°C
- Module quantity ( beneficiant ): 27.0 x 27.0 x 4.1mm
- Manufacturing unit configured for SPI protocol (might be simply modified to IIC)
Functions: 0.96 Inch Yellow Blue Color 6 Pin
- Utilized in client electronics.
- Used for Smartwatch, cell phone, and MP3 shows
- Small degree gaming shows.
- Big selection of viewing angle allow for use in low gentle
It is a 0.96 inch Yellow blue OLED show module. The show module are sometimes interfaced with any microcontroller utilizing SPI/IIC protocols. It’s having a decision of 128×64. The bundle consists of show panel , show, 6 pin male header presoldered to board.
OLED (Natural Mild-Emitting Diode) could also be a self light-emitting expertise composed of a thin , multi-layered natural movie positioned between an anode and cathode. In distinction to LCD expertise, OLED doesn’t require a backlight. OLED possesses excessive utility potential for just about all kinds of shows and is considered the final word expertise for the following era of flat-panel shows.
OLEDs fundamental construction consists of natural supplies positioned between the cathode and subsequently the anode, which consists {of electrical} conductive clear Indium Tin Oxide (ITO). The natural supplies compose a multi-layered skinny movie, which contains the opening Transporting Layer (HTL), Emission Layer (EML) and subsequently the Electron Transporting Layer (ETL). By making use of the suitable electrical voltage, holes and electrons are injected into the EML from the anode and subsequently the cathode, respectively. The holes and electrons mix contained in the EML to make excitons, after which electro luminescence happens. The switch materials, emission layer materials and selection of electrode are the important thing elements that decide the standard of OLED elements.
OLED possesses excessive utility potential for just about every kind of shows and is taken into account the final phrase expertise for subsequent era of flat-panel shows.OLEDs fundamental construction consists of natural supplies positioned between the cathode and subsequently the anode, which consists {of electrical} conductive clear Indium Tin Oxide (ITO).
The natural supplies compose a multi-layered skinny movie, which contains the opening Transporting Layer (HTL), Emission Layer (EML) and subsequently the Electron Transporting Layer (ETL). By making use of the suitable electrical voltage, holes and electrons are injected into the EML from the anode and subsequently the cathode, respectively. The holes and electrons mix contained in the EML to make excitons, after which electro luminescence happens. The switch materials, emission layer materials and collection of electrode are the important thing elements that decide the usual of OLED elements.
It helps for a number of working modes: 4-wire SPI.
Appropriate with 3.3V and 5V management chip I / O degree (with none settings, straight appropriate).
