Options: 0.96 Inch OLED Show Module
- OLED Driver IC: SSD1306
- Decision: 128 x 64
- Visible Angle: >160Ā°
- Enter Voltage: 3.3V ~ 6V
- Appropriate I/O Degree: 3.3V, 5V
- Mini Measurement: 2.7 x 2.8cm
- Solely Want 2 I/O Port to Management
- Pixel Coloration:Ā White (128×48 pixels)
- Full Appropriate with Arduino
- Working temperature: -30Ā°C ~ 70Ā°C
- Module quantity ( beneficiant ): 27.0 x 27.0 x 4.1mm
- Manufacturing unit configured for SPI protocol (will be simply modified to IIC)
Functions: 0.96 Inch OLED Show Module
- Utilized in client electronics.
- Used for Smartwatch, cell phone, and MP3 shows
- Small degree gaming shows.
- Wide selection of viewing angle allow for use in low mild
This can be a 0.96 inch White OLED show module. The show module are sometimes interfaced with any microcontroller utilizing SPI/IIC protocols. It’s having a decision of 128×64. The bundle contains show panel ,show, 6 pin male header presoldered to board.
OLED (Natural Gentle-Emitting Diode) could also be a self light-emitting know-how composed of a thin , multi-layered natural movie positioned between an anode and cathode. In distinction to LCD know-how, OLED does not require a backlight. OLED possesses excessive software potential for nearly all types of shows and is taken into account the final phrase know-how for subsequent technology of flat-panel shows.
OLEDs fundamental construction consists of natural supplies positioned between the cathode and due to this fact the anode, which consists {of electrical} conductive clear Indium Tin Oxide (ITO). The natural supplies compose a multi-layered skinny movie, which includes the opening Transporting Layer (HTL), Emission Layer (EML) and due to this fact the Electron Transporting Layer (ETL). By making use of the appropriate electrical voltage, holes and electrons are injected into the EML from the anode and due to this fact the cathode, respectively. The holes and electrons mix contained in the EML to make excitons, after which electro luminescence happens. The switch materials, emission layer materials and collection of electrode are the important thing elements that decide the usual of OLED elements.
It may be used with both anspi interface – selectable by soldering two jumpers on the once more. The design is completely 5v-geared up, with an onboard regulator and constructed in elevate converter. It is simpler than ever to connect instantly in your 3v or 5v microcontroller with out having any form of stage shifter. It’s Absolutely suitable with a number of controlling chips together with Arduino and extra and it Help a variety of voltage enter. It really works completely effectively with out the necessity of again mild and is integrated with Tremendous low energy consumptionāsolely 0.08W when the entire display screen lights up and 0.06W when displaying characters.