Options: 0.96 Inch Blue OLED diaplay Module
- OLED Driver IC: SSD1306
- Decision: 128 x 64
- Visible Angle: >160°
- Enter Voltage: 3.3V ~ 6V
- Suitable I/O Stage: 3.3V, 5V
- Mini Dimension: 2.7 x 2.8cm
- Solely Want 2 I/O Port to Management
- Pixel Colour: Blue (128×48 pixels)
- Full Suitable with Arduino
- Working temperature: -30°C ~ 70°C
- Module quantity ( beneficiant ): 27.0 x 27.0 x 4.1mm
- Manufacturing unit configured for SPI protocol (could be simply modified to IIC)
Purposes: 0.96 Inch Blue OLED diaplay Module
- Utilized in shopper electronics.
- Used for Smartwatch, cell phone, and MP3 shows
- Small degree gaming shows.
- Big selection of viewing angle allow for use in low mild
It is a 0.96 inch blue OLED show module. The show module could be interfaced with any microcontroller utilizing SPI/IIC protocols. It’s having a decision of 128×64. The package deal contains show board, show, 6 pin male header presoldered to board.
OLED (Natural Mild-Emitting Diode) is a self light-emitting expertise composed of a skinny, multi-layered natural movie positioned between an anode and cathode. In distinction to LCD expertise, OLED doesn’t require a backlight. OLED possesses excessive utility potential for nearly all forms of shows and is thought to be the final word expertise for the following era of flat-panel shows.
OLEDs primary construction consists of natural supplies positioned between the cathode and due to this fact the anode, which consists {of electrical} conductive clear Indium Tin Oxide (ITO).
The natural supplies compose a multi-layered skinny movie, which contains the opening Transporting Layer (HTL), Emission Layer (EML) and due to this fact the Electron Transporting Layer (ETL). By making use of the suitable electrical voltage, holes and electrons are injected into the EML from the anode and due to this fact the cathode, respectively. The holes and electrons mix contained in the EML to make excitons, after which electro luminescence happens. The switch materials, emission layer materials and choice of electrode are the important thing elements that decide the usual of OLED parts.
It may be used with both anspi interface – selectable by soldering two jumpers on the once more. The design is completely 5v-geared up, with an onboard regulator and constructed in elevate converter. It is simpler than ever to connect instantly on your 3v or 5v microcontroller with out having any type of stage shifter. It’s Totally suitable with a number of controlling chips together with Arduino and extra and it Assist a variety of voltage enter. It really works completely properly with out the necessity of again mild and is integrated with tremendous low energy consumption–solely 0.08W when the entire display screen lights up and 0.06W when displaying characters.
