OLED 4pin 128×64 Show Module 1.3″ White Coloration
1.3 inch OLED display module with 128×64 resolution.
The emissive electroluminescent layer is a film of organic compound that emits light in response to an electric current.
Working without backlight, the OLED display module could give out light by itself.
The OLED screen can achieve a higher contrast ratio in low ambient light condition.
Small dimension, suitable for MP3, function cellphone, smart watch, and smart health device.
Description
Options: 1.3 inch OLED show module with 128×64 decision(White)
- Show Measurement: 1.3 inch
- Textual content Coloration: White
- Decision: 128×64
- Driver IC: SH1106
- Enter Voltage: 3.3V/5V
- Pins:
- GND: (Floor)
- VCC: (Energy)
- SCL: (Clock)
- SDA: (Knowledge Cable)
Pin Definition:
1.GND: Energy floor
2.VCC: Energy constructive
3.SCL: Clock wire
4.SDA: Knowledge wire.
This 1.3″ I2C OLED Show is an OLED monochrome 128×64 dot matrix show module with I2C Interface. It’s excellent if you want an ultra-small show. Evaluating to LCD, OLED screens are far more aggressive, which has an a variety of benefits akin to excessive brightness, self-emission, excessive distinction ratio, slim define, huge viewing angle, huge temperature vary, and low energy consumption. It’s appropriate with any 3.3V-5V microcontroller, akin to Arduino.
OLED 1.3 inch is a monochrome graphic show module with a built-in 1.3 inch, 128X64 high-resolution show. OLED 1.3 inch is able to determine regardless of the absence of backlight. In a darkish surroundings, distinction of OLED show is above LCD show. This system is I^2C or SPI appropriate. Because of its functionality in displaying, it is typically utilized in varied software for situations, sensible watch, MP3, operate cellphone, moveable well being system and plenty of others.
The 1.3 Inch 128×64 OLED monitor Module produces blue textual content on black background with glorious distinction when furnished with DC 2.8V provide. The OLED Show Modules additionally provides a extremely huge viewing angle of about larger than 160°.
OLED’s are the long run of shows, as they possess various the perfect benefits over each standard show applied sciences of LCD’s and LED‘s.
Essentially the most enticing factor about utilizing the OLED shows is that they’re doing not want a back-light like standard LCD/LED screens. The natural materials itself includes a property known as Electroluminescence (EL), which causes the material to “glow” when stimulated by a present or {an electrical} subject. Finest vitality saving shows ever!!!
This 1.3 Inch 128×64 OLED Show Display screen Module provides 128×64 pixel decision. They’re that includes a lot much less thickness than LCD shows with good brightness and in addition produce higher and true colours.
This OLED Show Module is extraordinarily compact and might add a wonderful ever interface expertise to your Arduino mission. The connection of this show with Arduino is made by SPI interface.
OLEDs primary construction consists of natural supplies positioned between the cathode and due to this fact the anode, which consists {of electrical} conductive clear Indium Tin Oxide (ITO). The natural supplies compose a multi-layered skinny movie, which includes the opening Transporting Layer (HTL), Emission Layer (EML) and due to this fact the Electron Transporting Layer (ETL). By making use of the appropriate electrical voltage, holes and electrons are injected into the EML from the anode and due to this fact the cathode, respectively. The holes and electrons mix contained in the EML to make excitons, after which electro luminescence happens. The switch materials, emission layer materials and choice of electrode are the important thing elements that decide the usual of OLED parts.
The traits of this show module are excessive brightness, self-emission, excessive distinction ratio, slim/skinny define, huge viewing angle, huge temperature vary and low energy consumption.
OLED show, no want backlight, self-illumination, the show efficiency is finest than the conventional LCD show, additionally decrease consumption. I2C interface, requires solely two sign pin. It Comes with improvement assets and handbook (examples for Raspberry Pi/Jetson Nano/Arduino/STM32).
The 1.3 Inch 128×64 OLED monitor Module produces blue textual content on black background with glorious distinction when furnished with DC 2.8V provide. The OLED Show Modules additionally provides a extremely huge viewing angle of about larger than 160°.
