As a result of benefits like extremely low energy consumption, broad viewing angle, clear show with out electrical energy, it is a perfect selection for functions comparable to shelf label, industrial instrument, and so forth.

Specs:

• Working voltage: 3.3V~5V
• Interface: SPI
• Define dimension: 170.2mm × 111.2mm
• Show measurement: 163.2mm × 97.92mm
• Dot pitch: 0.255 × 0.255
• Decision: 640 × 384
• Show coloration: yellow, black, white
• Gray stage: 2
• Full refresh time: 16s
• Refresh energy: 38mW(typ.)
• Standby energy: <0.017mW
• Viewing angle: >170°

The post E-Paper 7.5″ HAT C Show Module appeared first on Dilson Enterprises.

Because of the benefits like extremely low energy consumption, extensive viewing angle, clear show with out electrical energy, it is a perfect alternative for purposes comparable to shelf label, industrial instrument, and so forth.

Specs:

• Working voltage: 3.3V~5V
• Interface: SPI
• Define dimension: 170.2mm × 111.2mm
• Show measurement: 163.2mm × 97.92mm
• Dot pitch: 0.205 × 0.204
• Decision: 800×480
• Show colour: pink, black, white
• Gray scale: 2
• Full refresh time: 16s
• Refresh energy: 38mW(typ.)
• Standby energy: <0.017mW
• Viewing angle: >170°

7.5 Inch E-Paper Show Hat (B) is an E-Ink show HAT for Raspberry Pi, 7.5inch, 800 *480 decision, with embedded controller, and is well communicable through SPI interface. This system helps pink, black, and white three-colour show. As a consequence of the advantages like ultra-low energy consumption, extensive viewing angle, clear show with out electrical energy, it is an ideal alternative for purposes like shelf label, industrial instrument, and so forth. It has a full refresh time of 16seconds. Included with Refresh energy: 38mW(sort.) and Standby energy: 170°. This system is included with handbook assets and growth assets. It helps On-board voltage translator, appropriate with 3.3V/5V MCUs and has a dot pitch of 0.205 x 0.204.

E-paper show makes use of microcapsule electrophoretic know-how for displaying, the precept is: charged particles suspended inside the clear fluid will transfer to sides of microcapsule when {an electrical} area is utilized, making the microcapsule seem by reflecting ambient gentle, at the same time as conventional printed paper.

E-paper show will clearly show photos/texts underneath lamplight or pure gentle requires no backlight and options almost as much as 180° viewing angle. It’s normally used as e-reader because of its paper-like impact.

This product is an E-paper system adopting the picture show know-how of Microencapsulated Electrophoretic Show, MED. The preliminary method is to make tiny spheres, throughout which the charged color pigments are suspending inside the clear oil and would transfer relying on the digital cost. The E-paper display show patterns by reflecting the ambient gentle, so it is no background gentle requirement. Below ambient gentle, the E-paper display nonetheless has excessive visibility with a large viewing angle of 180 levels. It’s the perfect alternative for E-reading. (Be aware that the e-Paper can not help updating instantly underneath daylight).Completely different from the normal SPI protocol, the info line from the slave to the grasp is hidden for the reason that system solely has show requirement.

The post E-Paper 7.5″ HAT B Show Module appeared first on Dilson Enterprises.

As a result of benefits like extremely low energy consumption, vast viewing angle, clear show with out electrical energy, it is a perfect alternative for functions resembling shelf label, industrial instrument, and so forth.

Specs:

• Working voltage: 3.3V~5V
• Interface: SPI
• Define dimension: 170.2mm × 111.2mm
• Show measurement: 163.2mm × 97.92mm
• Dot pitch: 0.205 × 0.204
• Decision: 800×480
• Show colour: black, white
• Gray scale: 2
• Full refresh time: 5s
• Refresh energy: 38mW(typ.)
• Standby energy: <0.017mW
• Viewing angle: >170°

The post E-Paper 7.5″ HAT Show Module appeared first on Dilson Enterprises.

That is an E-Ink show module, 2.9inch, 296×128 decision, with embedded controller, speaking through SPI interface, helps partial refresh.

As a result of benefits like extremely low energy consumption, vast viewing angle, nice impact below daylight, it is a perfect selection for purposes resembling shelf label, industrial instrument, and so forth.

Specs:

• Working voltage: 3.3V/5V
• Interface: 3-wire SPI, 4-wire SPI
• Define dimension: 89.5mm × 38mm
• Show dimension: 66.89mm × 29.05mm
• Dot pitch: 0.138 × 0.138
• Decision: 295× 128
• Show colour: black, white
• Gray degree: 2
• Full refresh time: 2s
• Partial refresh time : 0.3s
• Refresh energy: 26.4mW(typ.)
• Standby energy: <0.017mW
• Viewing angle: >170°

Interface

That is an E-Ink show HAT for Raspberry Pi, 2.13inch, 212×104 decision, with an embedded controller, speaking through SPI interface, helps the pink, black, and white three-colour show.

There isn’t a backlight so it could actually hold displaying the final content material for a very long time even when the facility is down. As these shows haven’t any backlight panels and it doesn’t want a steady energy provide to show the (static information with periodic intervals) information on the display screen, it has a terrific benefit of ultra-low energy consumption. Additionally, it has a large viewing angle, nice viewing impact below daylight, principally, energy to the show is just required for refreshing. For connecting with controller boards like Raspberry Pi/Arduino/Nucleo, and so on. SPI interface can be utilized.2.13 Inch 3 color show E-Paper Hat (B) is an E-Ink show HAT for Raspberry Pi 2.13 inch, 212×104 decision, with embedded controller and speaking through SPI interface. This show helps pink, black, and white three-colour show.

As a result of advantages like ultra-low energy consumption, vast viewing angle, the great impact below daylight, it is an ideal selection for purposes like shelf label, industrial instrument, and so forth. Options No backlight, retains displaying final content material for an prolonged time even when energy down Extremely-low energy consumption, principally energy is merely required for refreshing Suitable with Raspberry Pi 2B/3B/Zero/Zero W Preserved solder pads for SPI interface, for connecting with different controller boards like Arduino/Nucleo, and so on. Comes with growth assets and guide examples for Raspberry/Arduino/STM32) Specs Working voltage: 3.3V Interface: SPI Define dimension: 65mm? 30.2mm Show dimension: 23.71mm? 48.55mm Dot pitch: 0.194 ? 0.194 Decision: 250 ? 122 Show color: black, white Gray degree: 2 Refresh energy: 26.5mV(typ.) Standby energy: 170ø

The post E-Paper 2.9″ Show Module appeared first on Dilson Enterprises.

Because of the benefits like extremely low energy consumption, extensive viewing angle, nice impact below daylight, it is a perfect alternative for purposes akin to shelf label, industrial instrument, and so forth.

Options:

• No backlight, retains displaying final content material for a very long time even when energy down
• Extremely low energy consumption, principally energy is just required for refreshing
• Suitable with Raspberry Pi 2B/3B/Zero/Zero W
• Preserved solder pads for SPI interface, for connecting with different controller boards like Arduino/Nucleo, and so forth.
• Comes with improvement sources and handbook (examples for Raspberry Pi/Arduino/STM32)

Interface

The post E-Paper 2.13″ HAT for Raspberry Pi Show Module appeared first on Dilson Enterprises.

• 2.13 inch e-Paper HAT(D) x1
• RPi screws pack (2pcs) x 1
• PH2.0 20cm 8Pin x1
• e- Paper Driver HAT x 1

Functions: E- paper 2.13 Inch HAT D Show module

• Schooling: Digital faculty books
• Wristwatches
• E-Books
• Newspaper
• Cell telephones
• Standing show

This can be a versatile E-Ink show HAT for Raspberry Pi, 2.13inch, 212×104 decision, with embedded controller, speaking by way of SPI interface, helps partial refresh.

In contrast with regular e-Paper panels, this versatile panel permits bending with out being broken, and it is thinner and lighter.

Mixed with the benefits like extremely low energy consumption, vast viewing angle, clear show with out electrical energy, it is a perfect alternative for functions the place curved floor show is required, reminiscent of industrial devices, sensible wearable-devices, and so forth.

Specs:

• Working voltage: 3.3V
• Interface: 3-wire SPI, 4-wire SPI
• Define dimension: 59.2mm × 29.2mm × 0.3mm
• Show measurement: 23.71mm × 48.55mm
• Dot pitch: 0.229 × 0.228
• Decision: 212 × 104
• Show shade: black, white
• Gray stage: 2
• Full refresh time: 2s
• Refresh energy: 26.4mW(typ.)
• Standby energy: <0.017mW
• Viewing angle: >170°

The post E-Paper 2.13″ HAT D Show Module appeared first on Dilson Enterprises.

Bundle Contains: E – Paper 2.13 inch HAT C Show module for Raspberry Pi

• 2.13-inch e-Paper HAT(C) x1
• RPi screws pack (2pcs) x 1
• PH2.0 20cm 8Pin x1

Purposes: E – Paper 2.13 inch HAT C Show module for Raspberry Pi

• Training: Digital faculty books
• Wristwatches
• E-Books
• Newspaper
• Cell telephones
• Standing show

That is an E-Ink show HAT for Raspberry Pi, 2.13inch, 212×104 decision, with embedded controller, speaking by way of SPI interface, helps yellow, black, and white three-color show.

As a result of benefits like extremely low energy consumption, extensive viewing angle, clear show with out electrical energy, it is a perfect selection for purposes equivalent to shelf label, industrial instrument, and so forth.

Specification:

• Working voltage: 3.3V/5V
• Interface: 3-wire SPI, 4-wire SPI
• Define dimension: 65mm × 30.2mm
• Show dimension: 23.71mm × 48.55mm
• Dot pitch: 0.229 × 0.228
• Decision: 212 × 104
• Show coloration: yellow, black, white
• Gray degree: 2
• Full refresh time: 15s
• Refresh energy: 26.4mW(typ.)
• Standby energy: <0.017mW
• Viewing angle: >170°

The post E-Paper 2.13″ HAT C Show Module appeared first on Dilson Enterprises.

• Working voltage: 3.3V/5V
• Interface: 3-wire SPI, 4-wire SPI
• Define dimension: 65mm × 30.2mm
• Show dimension: 23.71mm × 48.55mm
• Dot pitch: 0.229 × 0.228
• Decision: 212 × 104
• Show colour: pink, black, white
• Gray stage: 2
• Full refresh time: 15s
• Refresh energy: 26.4mW(typ.)
• Standby energy: <0.017mW
• Viewing angle: >170°

That is an E-Ink show HAT for Raspberry Pi, 2.13inch, 212×104 decision, with embedded controller, speaking by way of SPI interface, helps pink, black, and white three-color show.Because of the benefits like extremely low energy consumption, extensive viewing angle, clear show with out electrical energy, it is a perfect selection for functions resembling shelf label, industrial instrument, and so forth.

2.13 Inch 3 color show E-Paper Hat (B) is an E-Ink show HAT for Raspberry Pi 2.13 inch, 212×104 decision, with embedded controller and speaking by way of SPI interface. This show helps pink, black, and white three-color show. Because of the advantages like extremely low energy consumption, extensive viewing angle, clear show with out electrical energy, it is an ideal selection for functions like shelf label, industrial instrument, and so forth.

This product is an E-paper system adopting the picture show know-how of Microencapsulated Electrophoretic Show, MED. The preliminary strategy is to make tiny spheres, throughout which the charged colour pigments are suspending inside the clear oil and would transfer relying on the digital cost. The E-paper display show patterns by reflecting the ambient mild, so it is no background mild requirement. (Observe that the e-Paper can not assist updating instantly beneath daylight).

Totally different from the traditional SPI protocol, the information line from the slave to the grasp is hidden because the system solely has show requirement.

It has No backlight, retains displaying final content material for a very long time even when energy down and it Helps pink, black, and white, three-color show. It’s Preserved solder pads for SPI interface, for connecting with different controller boards like Arduino/Nucleo, and so forth. and it comes with growth sources and guide (examples for Raspberry Pi/Arduino/STM32).
Because of the advantages like extremely low energy consumption, extensive viewing angle, nice impact beneath daylight, it is an ideal selection for functions like shelf label, industrial instrument, and so forth. Options No backlight, retains displaying final content material for a very long time even when energy down Extremely low energy consumption, principally energy is simply required for refreshing.

It Comes with growth sources and guide examples for Raspberry/Arduino/STM32) Specs Op.erating voltage: 3.3V Interface: SPI Define dimension: 65mm ? 30.2mm Show dimension: 23.71mm ? 48.55mm Dot pitch: 0.194 ? 0.194 Decision: 250 ? 122 Show colour: black, white Gray stage: 2 Refresh energy: 26.5mV(typ.) Standby energy: 170ø Package deal Content material 1. 2.13inch e-Paper HAT x1 2. RPi screws pack (2pcs) x1 3. 9-pin 2.54 pitch SMD pinheader x1 Growth Assets.

The post E-Paper 2.13″ HAT B Show Module appeared first on Dilson Enterprises.

• Working voltage: 3.3V/5V
• Interface: SPI
• Define dimension: 65mm × 30.2mm
• Show dimension: 23.71mm × 48.55mm
• Dot pitch: 0.194× 0.194
• Decision: 250 × 122
• Show colour: black, white
• Gray stage: 2
• Partial refresh time: 0.3s
• Full refresh time: 2s
• Refresh energy: 26.4mW(typ.)
• Standby energy: <0.017mW
• Viewing angle: >170°

Package deal Embody:

• 2.13 inch e-Paper HAT x1
• RPi screws pack (2pcs) x1
• PH.0 20 cm 8 pin x1

That is an E-Ink show HAT for Raspberry Pi, 2.13inch, 250×122 decision, with embedded controller, speaking through SPI interface, helps partial refresh.
As a result of benefits like extremely low energy consumption, extensive viewing angle, clear show with out electrical energy, it is a perfect alternative for functions reminiscent of shelf label, industrial instrument, and so forth.

That is an E-Ink show HAT for Raspberry Pi, 2.13inch, 212×104 decision, with an embedded controller, speaking through SPI interface, helps the pink, black, and white three-colour show.

There isn’t a backlight so it may maintain displaying final content material for a very long time even when the ability is down. As these shows don’t have any backlight panels and it doesn’t want a steady energy provide to show the (static information with periodic intervals) information on the display, it has a terrific benefit of ultra-low energy consumption. Additionally, it has a large viewing angle, nice viewing impact underneath daylight,

Mainly energy to the show is simply required for refreshing. For connecting with controller boards like Raspberry Pi/Arduino/Nucleo, and so forth.. SPI interface can be utilized.This product is an E-paper gadget adopting the picture show know-how of Microencapsulated Electrophoretic Show, MED. The preliminary strategy is to make tiny spheres, throughout which the charged colour pigments are suspending throughout the clear oil and would transfer relying on the digital cost. The E-paper display show patterns by reflecting the ambient mild, so it is no background mild requirement. (Observe that the e-Paper can’t assist updating straight underneath daylight).

Completely different from the traditional SPI protocol, the data line from the slave to the grasp is hidden for the reason that gadget solely has show requirement.

It has No backlight, retains displaying final content material for a very long time even when energy down and it helps Three color show. It has Extremely low energy consumption, principally energy is simply required for refreshing.

As a result of advantages like extremely low energy consumption, extensive viewing angle, nice impact underneath daylight, it is an ideal alternative for functions like shelf label, industrial instrument, and so forth. It Preserved solder pads for SPI interface, for connecting with different controller boards like Arduino/Nucleo, and so forth. It has an working voltage of three.3V/5V.

The post E-Paper 2.13″ HAT Show Module appeared first on Dilson Enterprises.

That is an E-Ink show module, 1.54inch, 200×200 decision, with embedded controller, speaking through SPI interface, helps partial refresh.

As a result of advantages like extremely low energy consumption, large viewing angle, nice impact beneath daylight, it is an ideal alternative for purposes like shelf label, industrial instrument, and so forth.

The 1.54inch e-Paper is up to date to 1.54inch e-Paper V2 model. Codes of the 2 model will not be suitable with one another. Apart from the controller and codes, the brand new V2 model is strictly the identical because the previous one. Should you’re customers of the previous model, you wish to replace your codes additionally on your new order.

This product is an E-paper gadget adopting the picture show know-how of Microencapsulated Electrophoretic Show, MED. The preliminary strategy is to make tiny spheres, throughout which the charged coloration pigments are suspending inside the clear oil and would transfer relying on the digital cost. The E-paper display screen show patterns by reflecting the ambient gentle, so it is no background gentle requirement. Beneath ambient gentle, the E-paper display screen nonetheless has excessive visibility with a large viewing angle of 180 levels. It’s the splendid alternative for E-reading. (Word that the e-Paper can not help updating straight beneath daylight) reflecting the ambient gentle, so it has no background gentle requirement. (Word that the e-Paper can not help updating straight beneath daylight)

Totally different from the standard SPI protocol, the info line from the slave to the grasp is hidden because the gadget solely has a show requirement.

It requires no No backlight, retains displaying final content material for a very long time even when energy down and helps purple, black, and white three-color show.

It helps SPI interface, for connecting with controller boards like Raspberry Pi/Nucleo, and so on and has an working voltage of3.3V. It comes with growth sources and handbook (examples for Raspberry Pi/STM32).

The post E-Paper 1.54″ Show Module appeared first on Dilson Enterprises.