E-Paper 7.5″ HAT B Show Module
This is an E-Ink display HAT for Raspberry Pi, 7.5inch, 800×480 resolution, with embedded controller, communicating via SPI interface, supports red, black, and white three-color display.
Features: E-Ink Display HAT B for RSPi
- No backlight, keeps displaying last content for a long time even when power down
- Ultra low power consumption, basically power is only required for refreshing
- Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
- SPI interface, for connecting with other controller boards like Raspberry/Arduino/Nucleo, etc.
- Onboard voltage translator, compatible with 3.3V/5V MCUs
- Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
Package Includes:E-Ink Display HAT B for RSPi
- 7.5 inch e-Paper x1
- E-paper Driver HAT x 1
- RPi screws pack (2pcs) x 1
- PH2.0 20 cm 8 pin x 1
Applications:E-Ink Display HAT B for
- Education: Digital school books
- Wristwatches
- E-Books
- Newspaper
- Cell phones
- Status display
Description
That is an E-Ink show HAT for Raspberry Pi, 7.5inch, 800×480 decision, with embedded controller, speaking through SPI interface, helps pink, black, and white three-color show.
Because of the benefits like extremely low energy consumption, extensive viewing angle, clear show with out electrical energy, it is a perfect alternative for purposes comparable to shelf label, industrial instrument, and so forth.
Specs:
- Working voltage: 3.3V~5V
- Interface: SPI
- Define dimension: 170.2mm × 111.2mm
- Show measurement: 163.2mm × 97.92mm
- Dot pitch: 0.205 × 0.204
- Decision: 800×480
- Show colour: pink, black, white
- Gray scale: 2
- Full refresh time: 16s
- Refresh energy: 38mW(typ.)
- Standby energy: <0.017mW
- Viewing angle: >170°
7.5 Inch E-Paper Show Hat (B) is an E-Ink show HAT for Raspberry Pi, 7.5inch, 800 *480 decision, with embedded controller, and is well communicable through SPI interface. This system helps pink, black, and white three-colour show. As a consequence of the advantages like ultra-low energy consumption, extensive viewing angle, clear show with out electrical energy, it is an ideal alternative for purposes like shelf label, industrial instrument, and so forth. It has a full refresh time of 16seconds. Included with Refresh energy: 38mW(sort.) and Standby energy: 170°. This system is included with handbook assets and growth assets. It helps On-board voltage translator, appropriate with 3.3V/5V MCUs and has a dot pitch of 0.205 x 0.204.
E-paper show makes use of microcapsule electrophoretic know-how for displaying, the precept is: charged particles suspended inside the clear fluid will transfer to sides of microcapsule when {an electrical} area is utilized, making the microcapsule seem by reflecting ambient gentle, at the same time as conventional printed paper.
E-paper show will clearly show photos/texts underneath lamplight or pure gentle requires no backlight and options almost as much as 180° viewing angle. It’s normally used as e-reader because of its paper-like impact.
This product is an E-paper system adopting the picture show know-how of Microencapsulated Electrophoretic Show, MED. The preliminary method is to make tiny spheres, throughout which the charged color pigments are suspending inside the clear oil and would transfer relying on the digital cost. The E-paper display show patterns by reflecting the ambient gentle, so it is no background gentle requirement. Below ambient gentle, the E-paper display nonetheless has excessive visibility with a large viewing angle of 180 levels. It’s the perfect alternative for E-reading. (Be aware that the e-Paper can not help updating instantly underneath daylight).Completely different from the normal SPI protocol, the info line from the slave to the grasp is hidden for the reason that system solely has show requirement.
