E-Paper 2.13″ HAT Show Module
This is an E-Ink display HAT for Raspberry Pi, 2.13inch, 250×122 resolution, with embedded controller, communicating via SPI interface, supports partial refresh.
Features: 2:13 Inch E- Paper HAT Display Module
- No backlight, keeps displaying last content for a long time even when power down
- Ultra low power consumption, basically power is only required for refreshing
- Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
- SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc.
- Onboard voltage translator, compatible with 3.3V/5V MCUs
- Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
Applications: 2:13 Inch E- Paper HAT Display Module
- Education
- Digital school books
- Wristwatches
- E-Books
- Newspaper
- Cell phones
- Status display
Description
Specs:
- Working voltage: 3.3V/5V
- Interface: SPI
- Define dimension: 65mm × 30.2mm
- Show dimension: 23.71mm × 48.55mm
- Dot pitch: 0.194× 0.194
- Decision: 250 × 122
- Show colour: black, white
- Gray stage: 2
- Partial refresh time: 0.3s
- Full refresh time: 2s
- Refresh energy: 26.4mW(typ.)
- Standby energy: <0.017mW
- Viewing angle: >170°
Package deal Embody:
- 2.13 inch e-Paper HAT x1
- RPi screws pack (2pcs) x1
- PH.0 20 cm 8 pin x1
That is an E-Ink show HAT for Raspberry Pi, 2.13inch, 250×122 decision, with embedded controller, speaking through SPI interface, helps partial refresh.
As a result of benefits like extremely low energy consumption, extensive viewing angle, clear show with out electrical energy, it is a perfect alternative for functions reminiscent of shelf label, industrial instrument, and so forth.
That is an E-Ink show HAT for Raspberry Pi, 2.13inch, 212×104 decision, with an embedded controller, speaking through SPI interface, helps the pink, black, and white three-colour show.
There isn’t a backlight so it may maintain displaying final content material for a very long time even when the ability is down. As these shows don’t have any backlight panels and it doesn’t want a steady energy provide to show the (static information with periodic intervals) information on the display, it has a terrific benefit of ultra-low energy consumption. Additionally, it has a large viewing angle, nice viewing impact underneath daylight,
Mainly energy to the show is simply required for refreshing. For connecting with controller boards like Raspberry Pi/Arduino/Nucleo, and so forth.. SPI interface can be utilized.This product is an E-paper gadget adopting the picture show know-how of Microencapsulated Electrophoretic Show, MED. The preliminary strategy is to make tiny spheres, throughout which the charged colour pigments are suspending throughout the clear oil and would transfer relying on the digital cost. The E-paper display show patterns by reflecting the ambient mild, so it is no background mild requirement. (Observe that the e-Paper can’t assist updating straight underneath daylight).
Completely different from the traditional SPI protocol, the data line from the slave to the grasp is hidden for the reason that gadget solely has show requirement.
It has No backlight, retains displaying final content material for a very long time even when energy down and it helps Three color show. It has Extremely low energy consumption, principally energy is simply required for refreshing.
As a result of advantages like extremely low energy consumption, extensive viewing angle, nice impact underneath daylight, it is an ideal alternative for functions like shelf label, industrial instrument, and so forth. It Preserved solder pads for SPI interface, for connecting with different controller boards like Arduino/Nucleo, and so forth. It has an working voltage of three.3V/5V.
