HM 10 TTL BLE Bluetooth Module

With BLE 4.0 help, Inside with logic degree conversion circuit. The module provides an on-board voltage regulator and is TTL-level and 5 V tolerant. The HM 10 BLE 4.0 Bluetooth Module SoC might be accessed by way of UART interface.

The Bluetooth-SoC are sometimes accessed by way of UART interface and helps AT-Instructions for setup. It helps full Bluetooth 4.0 normal and can be utilized on your Arduino or microcontroller to Android or iOS communication tasks.

In case you’re in want of such a 4.0 BLE Bluetooth module, MCU are sometimes discovered , also can managed by a overseas Bluetooth gadget for setting, can switch information, and might remotely management 10 PIO pins,so the only option is HM-10 Bluetooth module.

Assist distant mode, distant gadget can management PIO pin or modify settings by AT commander when Linked. (Comparable to Iphone4s/5 ipad, Note2 and so forth.)

HM TTL Module Assist Central and Peripheral mode swap, modify by AT commander Bluetooth module use CSR BlueCore or TI CC2540, Grasp and slave roles in a single, transmission model and distant management model and PIO stateacquisition features in a single, Assist the AT command modify moduleparameters, Handy and versatile .Transmission model are sometimes wont to transmit information between two Bluetoothdevices.

Distant Management model are sometimes wont to Management PIO ports output excessive orlow degree with none different MCU.The PIO state acquisition model are sometimes wont to acquisition PIO ports state with out every other MUC. (Solely help Bluetooth V2.1)HM-01, HM-02, HM-03, HM-04, HM-05, HM-06, HM-07, HM-08, HM-09 isBluetooth V2.1 model. Use CSR Chip. Excessive-performance TI CC2541 Bluetooth Low Vitality SOC constructed andEasy to make use of due to 5 V/TTL publicity degree Tolerant inputs. It isConfigurable with at instructions per UART

Supreme for wi-fi communication between Arduino or Micro controllers and Android or iOS units
Working voltage: 5 V, modes: Grasp/Slave (adjustable), baud price: 9600 – 115200 (adjustable), Interface: UART, Bluetooth 4.0. It may Ship and obtain no bytes restrict.

Its Working frequency: 2.4GHz ISM band and Modulation technique: GFSK(Gaussian Frequency Shift Keying). Included with RF Energy: -23dbm, -6dbm, 0dbm, 6dbm, can modify by way of AT Command AT+POWE.

Its Velocity : Asynchronous : 6K Bytes and Synchronous : 6K Bytes

HM BLE TTL module Energy vary : +3.3VDC 50mALong vary : Open house have 100 Meters with iphone4s

Energy : In sleep mode 400uA~1 .5mA, Lively mode 8.5mA.Included with Working temperature: –5 ~ +65 Centigrade and Measurement : HM-10 26.9mm x 1 3mm x 2.2 mm.
Product Particulars: