HM 10 BLE Core Bluetooth Module Authentic

The HM-10 is a readily available Bluetooth 4.0 module, which can configure as either Master or slave. This module is used for establishing wireless data communication. The module is designed by using the Texas Instruments CC2540 or CC2541Bluetooth low energy(BLE) System on Chip (SoC). The module design and firmware originated from the Jinan Huamao Technology Company. You can use it simply for a serial port replacement to establish connection between MCU, PC to your embedded project and etc. There are 2 versions of HM-10. HM-10C and the HM-10S. Here it’s HM-10S Bluetooth module.

Applications:HM 10 BLE Core Bluetooth Module

  • Computer and peripheral devices
  • Robotics
  • Industrial control
  • MCU projects
Description

The HM-10 Bluetooth module combines the highly effective and programmable Texas Devices CC2541 Chipset with the desired elements to start out out immediately collectively together with your BLE improvement.The module affords an on-board voltage regulator and is TTL-level and 5 V tolerant. The Bluetooth-SoC are sometimes accessed through UART interface and helps AT-Instructions for setup. It helps full Bluetooth 4.0 customary and could also be used on your Arduino or microcontroller to Android or iOS communication tasks.This module are sometimes wont to exchange HC-05, HC-06 and HC-07 gadgets.Thismodule additionally might be configured and used as an iBeacon used with Apple gadgets.

The HM-10 makes use of the customized attribute to ship and obtain the information it receives over the serial UART interface. It really works by setting the price of the customized attribute to the price of the information to be transmitted. It then sends out a notification to the distant machine to say there’s new information obtainable.

Once you inform the the HM-10 to transmit ā€œHELLOā€, it first units the price of the customized attribute to ā€œHELLOā€ then it sends out a notification telling the distant machine ā€œHey, I even have new information, come and acquire it.ā€ The distant machine is scanning for the notifications and when it receives one it is aware of there is a substitute worth, so it reads the information then sends again a message saying ā€œThanks, I even have itā€.

The customized attribute can delay to twenty characters, this implies to ship a string longer than 20 characters the HM-10 splits the information in to twenty character segments and sends every one in flip till none are left.

HM 10 Bluetooth module use CSR BlueCore or TI CC2540, Grasp and slave roles in a single, transmission model and distant model and PIO state acquisition features in a single, Assist the AT command modify module parameters, Handy and versatile.

Transmission model are sometimes wont to transmit information between two Bluetooth gadgets. Distant Management model are sometimes wont to Management PIO ports output excessive or low degree with none different MCU.

Specification:HM 10 BLE Core Bluetooth Module

  • BT Model: BT Specification V4.0 BLE
  • Working frequency: 2.4GHz ISM band
  • Modulation methodology: GFSK (Gaussian Frequency Shift Keying)
  • RF Energy: -23dbm, -6dbm, 0dbm, 6dbm
  • Pace: Asynchronous: 2-6K Bytes, Synchronous: 2-6K Bytes
  • Safety: Authentication and encryption
  • Service: 0xFFE0 (Modifiable use AT+UUID command)
  • Attribute: 0xFFE1 (Modifiable use AT+UUID command)
  • Attribute: Notify and Write (Modifiable use AT+UUID command)
  • Energy: +2.5V~3.5VDC 50mA
  • Energy: Lively state 8.5mA; Sleep state 50~200uA
  • Working temperature: ā€“20 ~ +105 Centigrade
  • Dimension: HM-10 27mm x 13mm x 2.2 mm