Arduino Due Board – Specs
The Arduino Due is a microcontroller board based mostly on the Atmel SAM3X8E ARM Cortex-M3 CPU. It’s the first Arduino board based mostly on a 32-bit ARM core microcontroller. It has 54 digital enter/output pins (of which 12 can be utilized as PWM outputs), 12 analog inputs, 4 UARTs ({hardware} serial ports), a 84 MHz clock, an USB OTG succesful connection, 2 DAC (digital to analog), 2 TWI, an influence jack, an SPI header, a JTAG header, a reset button and an erase button.
The board incorporates the whole lot wanted to help the microcontroller; merely join it to a pc with a micro-USB cable or energy it with a AC-to-DC adapter or battery to get began. The Due is suitable with all Arduino shields that work at 3.3V and are compliant with the 1.0 Arduino pinout.
The Due follows the 1.0 pinout:
- TWI: SDA and SCL pins which might be close to to the AREF pin.
- IOREF: permits an hooked up protect with the right configuration to adapt to the voltage supplied by the board. This allows protect compatibility with a 3.3V board just like the Due and AVR-based boards which function at 5V.
- An unconnected pin, reserved for future use.
Arduino Due Board – Product Particulars:
| Minimal Order Amount | 1 Piece |
| Digital I/O Pin | 54 |
| Microcontroller | AT91SAM3X8E |
| Working Voltage | 3.3V |
| Enter Voltage (beneficial) | 7-12V |
| Enter Voltage (limits) | 6-16V |
| Weight | 36g |
| Size | 101.52 mm |
| Width | 53.3 mm |
| Enter Voltage (restrict) | 6-20V |
| PWM Digital I/O Pins | 12 |
| Analog Enter Pins | 12 |
| Analog Output Pins | 2 (DAC) |
| DC Present per I/O Pin | 130 mA |
| DC Present for 3.3V Pin | 800 mA |
| DC Present for 5V Pin | 800 mA |
| SRAM | 96 KB (64) |
| Clock Velocity | 84 MHz |
