ESP8285 M2 WiFi Module

ESP-M2 is encapsulated by the high performance chip ESP8285, which is equal to ESP8266 chip plus 1M Flash. The chip ESP825 is encapsulated a advanced Tensilica’s L106 32-bit CPU, together with SRAM. ESP825 has the full and complete WiFi fuction, which can used independently and alsoused as a slaver with other Hoster MCU, which can start directly from the out-built Flash. In addition, the built-in high-speed buffer is benefit for the system performance. Especially, ESP8285 can be used as a WiFi adapter by SPI/SDIO and/or I2C/UART interface, when it is applied to the other MCU design.

Features

Ultra-small size
Support serial to WiFi
Wireless transparent transmission
Long distance transmission with ultra-low power
Support outboard antenna
Bearing high temperature to 125^oC, compared to the 85^oC for ESP8266.

Mannequin Identify/Quantity	ESP 8285
Model	DOIT
Working Temperature Vary	-40 -85 Deg C
Module Dimension	12.3mmx20mm
Energy Provide Voltage	DC 3.3V
IO max Output Present	12 mA

Description:

ESP8285=ESP8266+1M Flash, chip feature1) measurement is ultra-small2) serial to WiFi3) wi-fi transmission4) long-range ultra-low energy consumption5) excessive temperature, as much as 125^oC) totally suitable with ESP8266, the esp8266 supply code can be utilized for esp8285

SOC Options:

Constructed-in Tensilica L106 ultra-low energy 32-bit microprocessor, clocked at 80MHz and 160MHz help RTOS
Constructed-in TCP / IP protocol stack
Constructed-in 1 channel 10 bit precision ADC
Peripheral Interface HSPI, UART, I2C, I2S, IR Distant Management, PWM, GPIO
The deep sleep maintain present is 10uA and the shutdown present is lower than 5uA
Get up inside 2 ms, join and cross the packet
Standby energy consumption lower than 1.0mW (DTIM3)

Wi-Fi options:

Helps 802.11 b / g / n / e / i
Help Station, SoftAP, SoftAP + STA mode
Help for Wi-Fi Direct (P2P)
Helps CCMP (CBC-MAC, counter mode), TKIP (MIC, RC4), WAPI (SMS4), WEP
(RC4), CRC {hardware} acceleration
P2P discovery, P2P GO mode / GC mode and P2P energy administration
WPA / PA2 PSK and WPS
802.11 i safety features: pre-authentication and TSN
Helps 802.11n (2.4 GHz)
802.1h / RFC1042 body encapsulation
Seamless roaming help
Help AT distant improve and cloud OTA improve
Help for Good Config options (together with Android and iOS gadgets)

Module peripherals

2xUART
1xADC
1xEn
1x wakeup pin
1xHSPI
1xI2C
1xI2S
As much as 11xGPIOs
4M bytes of SPI Flash
Working temperature vary: -40 ??? -85 ???
Module measurement: 12.3mm×20mm

Word:

Energy provide oltage is DC 3.3V
IO max output present is 12mA
NRST pin lively low, EN allow pin lively excessive RXD to MCU’s TXD, TXD to MCU’S
RXD

Software:

Family home equipment
Good socket, clever mild
Child monitor
Sensor Networks
Safety ID tag
Wi-fi positioning system beacon
Dwelling automation
Mesh community
IP digital camera
Can put on digital merchandise
Wi-fi location consciousness
Industrial Wi-fi Management

ESP-M2 is encapsulated by the excessive efficiency chip ESP8285, which is enough to ESP8266 chip plus 1M Flash. The chip ESP825 is encapsulated a superior Tensilica’s L106 32-bit CPU, alongside aspect SRAM. ESP825 has the whole and full WiFifuction, which can used independently and alsoused as a slaver with different Hoster MCU, which can begin straight from the out-built Flash. As well as, the built-in high-speed buffer is profit for the system efficiency. Particularly, ESP8285 are sometimes used as a WiFi adapter by SPI/SDIO and/or I2C/UART interface, when it is utilized to the other MCU design.

Options:

Extremely-small measurement, Help serial to WiFi, Wi-fi clear transmission, Lengthy-distance transmission with ultra-low energy, Help outboard antenna. Bearing excessive temperature to 125oC, in comparison with the 85oC for ESP8266.

ESP8285=ESP8266+1M Flash, chip feature1) measurement is ultra-small2) serial to WiFi3) wi-fi transmission4) long-range ultra-low-power consumption5) excessive temperature, as much as 125oC) totally suitable with ESP8266, the esp8266 supply code can be utilized for esp8285

SOC Options:

Constructed-in Tensilica L106 ultra-low energy 32-bit microprocessor, clocked at 80MHz and 160MHz help RTOS
Constructed-in TCP / IP protocol stack, Constructed-in 1 channel 10 bit precision ADC. Peripheral Interface HSPI, UART, I2C, I2S, IR distant , PWM, GPIO. The deep sleep maintain present is 10uA and subsequently the shutdown present is a smaller quantity than 5uA, awaken inside 2 ms, join and cross the packet, Standby energy consumption lower than 1.0mW (DTIM3)

Wi-Fi Options:

Helps 802.11 b / g / n / e / i, Help Station, SoftAP, SoftAP + STA mode, Help for Wi-Fi Direct (P2P), Helps CCMP (CBC-MAC, counter mode), TKIP (MIC, RC4), WAPI (SMS4), WEP, (RC4), CRC {hardware} acceleration, P2P discovery, P2P GO mode / GC mode and P2P energy administration. WPA / PA2 PSK and WPS, 802.11 i safety features: pre-authentication and TSN, Helps 802.11n (2.4 GHz), 802.1h / RFC1042 body encapsulation. Seamless roaming help, Help AT distant improve and cloud OTA improve, Help for Good Config options (together with Android and iOS gadgets)