The Bluetooth Transceiver HC-06 TTL Module with allow/disable button Breakout is the most recent Bluetooth wi-fi serial cable. This model of the favored Bluetooth makes use of the HC-05/HC-06 module. These modems work as a serial (RX/TX) pipe. Any serial stream from 9600 to 115200bps might be handed seamlessly out of your laptop to your goal.
The distant unit might be powered from 3.3V as much as 6V for simple battery attachment. All sign pins on the distant unit are 3V-6V tolerant. No degree shifting is required.
Don’t connect this gadget on to a serial port. You will want an RS232 to TTL converter circuit or Arduino XBee USB Adapter if you should connect this to a pc. You’ll be able to both solder a 6-pin header or particular person wires. The unit comes with no connector
The Hc-06 is a Serial port Bluetooth module which having totally certified Bluetooth V2.0+EDR (Enhanced Knowledge Fee) 3Mbps Modulation with full 2.4GHz radio transceiver and baseband. It makes use of CSR Blue core 04-Exterior single chip Bluetooth with CMOS know-how and with AFH (Adaptive Frequency Hopping Characteristic).These modems work as a serial (RX/TX) pipe. Any serial stream from 9600 to 115200bps might be handed seamlessly out of your laptop to your goal.The distant unit might be powered from 3.3V as much as 6V for simple battery attachment. All sign pins on the distant unit are 3V-6V tolerant. No degree shifting is required.Don’t connect this gadget on to a serial port. You will want an RS232 to TTL converter circuit if you should connect this to a pc.
The HC-06 module has 4 pins that are all required with a purpose to make a reference to the arduino UNO. The VCC pin is the place the module receives its enter voltage and is thus linked to the 5V pin on the arduino. The GND on the module is the bottom pin which connects to the bottom pin on the arduino. In different phrases, it’s the reference level from the place all the opposite voltages are measured. The RXD and TXD are the recieve and the switch pins respectively on the module. The module receives the serial knowledge from the grasp gadget (smartphone) by the RXD pin after which transfers that knowledge to the arduino utilizing the TXD pin. The TXD pin on the module is linked on to the RX pin on the arduino whereas the RXD pin of the module is linked to the TX pin on the arduino utilizing a voltage divider circuit because the RXD on the module can solely assist voltage upto 3.3V.
The AT instructions mode is used to vary the default settings of the HC-06 bluetooth module. Parameters such because the module title, password, baud price, sign energy might be modified after coming into AT instructions mode. As a way to enter the AT instructions mode, the module shouldn’t be paired to any of the close by units however must be linked to the arduino. By way of the serial monitor on the arduino IDE, AT instructions might be ship to the module. In our case, we modified the pairing password between the app and the module to strengthen authentication.
FEATURES:
- Customary 3.3 to 5V appropriate gadget
- As much as +4dBm RF transmit energy
- Safety: Authentication and encryption
- Profiles: Bluetooth serial port
- UART interface with programmable baud price
- Push change for issuing AT command
- 2 No LED for Communication and Standing
- With built-in antenna
- With edge connector
- Has output standing indication led, when output excessive TTL LED off, and vice verse
- Dimension: 26.9mm*13*2.2mm
- VCC GND OUT use 2.54mm customary pins to ease the connection
- 3 mm screw drive gap, simple to mount it on someplace